The G23 DULUX LED Bulb 3.5W = 7W 4000K S7 bulb is an LED bulb designed to replace a 7 watt compact fluorescent bulb with a G23 base.
The specification "3.5W = 7W" indicates that this LED bulb consumes only 3.5 watts of energy, but provides brightness equivalent to a 7 watt compact fluorescent bulb. This saves energy while maintaining a comparable level of brightness.
The color temperature of 4000K indicates that the light produced by this LED bulb is natural white light. This creates a neutral and balanced ambiance, often used in professional or commercial settings where bright, clear light is desired.
The mention "S7 on ferromagnetic ballast or on mains 220-240v AC ledvance" indicates that this LED bulb can be used with a ferromagnetic ballast (for use with an existing ballast) or directly on the mains with a voltage of 220-240 volts AC. It is compatible with Ledvance's S7 system, which allows you to use it in different types of luminaires.
It is important to check the manufacturer's specifications and recommendations to ensure that this LED bulb is suitable for your specific fixture and electrical configuration before installing.
-
-Z1 - FAMILYLampes
-
-Z4 - TechnologyLED
-
Power supplyBallast Ferromagnétique CCG
French sector -
Energy efficience labelE
-
Illumination colorBlanc
-
BaseG23
-
Switching cycle200000
-
Diameter32.30
-
Average nominal lifespan30000
-
Lamp efficacy114
-
Equivalency7
-
ManufacturerLEDVANCE
-
Power factor0.90
-
Luminous flux400
-
DimmableNon
-
IP classification20
-
Color rendering indice (CRI)80
-
Current0.016
-
Overall lenght135.00
-
CertificationsCE
RG 0 Photobio 62471 -
Operating range-20 +45
-
Power3.5
-
Glass shadeOpale
-
Color temperature4000
-
Input voltage220
-
Input voltage typeAC
-
indice stockage
-
packing height15.2
-
packing width7.9
-
packing weight0.571
-
packing qte10
-
delai sur commande8
-
packing longueur12.8
-
ecotaxe0.12
-
Angle120.00
-
pcb1
-
Weight0.036
-
Energy consumption4.00
-
text_informationtxt_br_EM
-
Eprel404755
-
statutActif - En cours d'existence
(à modifier dans le module "Réassurance")
(à modifier dans le module "Réassurance")
(à modifier dans le module "Réassurance")
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent