Product advantages
Same design as traditional NAV lamps with frosted ellipsoid full glass bulb
Full use of the existing luminaire reflector thanks to a 360 degree beam angle
Saves up to 78% energy when used as a replacement for sodium vapor lamps (NAV)
Instant ignition
Light distribution similar to traditional NAV lamps
Product features
Suitable for operation with conventional control gear (CCG) or 230 V AC network
Very high efficiency up to 190 lm/W
Power factor: 0.9
Type of protection: IP65
Surge protection: up to 2 kV (L-N)
Application areas
streets
lighting area
Pedestrian zones
Parks
Outdoor use only in suitable fixtures
Safety tips
Not suitable for use with an igniter or capacitor.
Suitable for connection to a ballast only.
When installed horizontally, the tc point of the lamp is located on the upper side of the lamp.
Not recommended for use in narrow fixtures and fixtures with narrow reflectors.
Only suitable for temperatures up to 50°C inside the luminaire. Not recommended for use in small luminaires and in luminaires with small reflectors.
-
-Z1 - FAMILYLampes
-
-Z4 - TechnologyLED
-
Power supplyFrench sector
SHP Ferromagnetic Ballast -
Energy efficience labelD
-
BaseE27
-
Switching cycle100000
-
Diameter38
-
Average nominal lifespan25000
-
Lamp efficacy154
-
Equivalency70
-
ManufacturerLEDVANCE
-
Power factor0.90
-
Luminous flux5400
-
FormTube
-
Frequency50/60
-
DimmableNon
-
IP classification65
-
Color rendering indice (CRI)70
-
Current0.155
-
Overall lenght210
-
CertificationsCE
RG 1 Photobio 62471 -
Operating range-20 +50
-
Power35
-
Glass shadeClaire
-
Color temperature2700
-
Input voltage220-240
-
Input voltage typeAC
-
indice stockage
-
packing height11.7
-
packing width15.2
-
packing weight1.166
-
packing qte6
-
delai sur commande8
-
packing longueur31.4
-
ecotaxe0.12
-
Angle360
-
pcb1
-
Weight0.12
-
Energy consumption35
-
text_informationtxt_br_secteur
txt_br_SHP
txt_secteur -
Eprel371177
-
statutActif - En cours d'existence
(à modifier dans le module "Réassurance")
(à modifier dans le module "Réassurance")
(à modifier dans le module "Réassurance")
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent