HAL rotating beacon 70W RBL101 24V 2200K 150x193mm IP65

The HAL BEACON LIGHTsignal from OSRAM is a 360° rotating yellow beacon light that can be mounted on vehicles with unusual widths, lengths, or loads, as well as on municipal vehicles, emergency vehicles, command vehicles, and accident rescue vehicles to draw attention to unusual situations on the road or in the work environment. The OSRAM rotating beacon can be used for improved visual recognition, marking, and securing hazardous areas or special locations. In addition, rotating beacons are used in certain installations, on machines and devices, and in alarm systems. The OSRAM rotating beacon is characterized by high efficiency thanks to a high-quality H1 halogen lamp with up to 1900 lumens and 2200 Kelvin, ensuring better visibility and therefore increased safety for you and others - day and night. Thanks to its non-slip and shock-absorbing rubber base, the OSRAM signal light is particularly resistant to vibrations. At the same time, the fully rubberized base helps to ensure a seal between the product and the subsurface. To reduce and prevent the accumulation of dirt on the beacon, the OSRAM LIGHTsignal HAL uses a smooth surface on the housing, thus preventing the signal effect from being impaired by dirt. The OSRAM LIGHTsignal HAL beacon impresses with its high luminosity. Thanks to a special texture inside the housing and the highly polished parabolic reflector, an efficient and effective light output is generated. The light is suitable for 24V vehicles and, thanks to its robust and functional design, the light offers various application possibilities and high flexibility. The mounting hardware included in the delivery allows for direct and precise installation and therefore immediate use of the beacons.
The three-point mounting system allows the light to be securely and securely attached to the vehicle roof.
In addition, the OSRAM LIGHTsignal HAL beacon light complies with the ECE R10 and R65 directives and is therefore approved for use in road traffic. 1) The OSRAM LIGHTsignal has been tested in our DIN EN ISO/IEC 17025-certified environmental simulation laboratory for extreme external influences in terms of water, dust, heat, and cold and has been validated with protection class IP65. OSRAM grants a 2-year warranty on this product. 2)
Special regulations apply regarding the use and application of rotating beacons. This is governed by the respective, country-specific regulations regarding road traffic permits.